Step 2 - Select Packet Type; Step 3 - Add Rule - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Create
ACL Name
Update
Click the Next button to continue to the next step.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Step 2 - Select Packet Type

After clicking the Next button, the following window will appear.
The fields that can be configured are described below:
Parameter
MAC
IPv4
IPv6
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.

Step 3 - Add Rule

MAC
After clicking the MAC radio button and the Next button, the following window will appear.
Description
Select this option to create a new ACL access list using the configuration wizard.
Enter the new ACL name here. This name can be up to 32 characters long.
Select this option to update an existing ACL access list. Select the existing ACL in
the table to process with the update.
Figure 8-3 ACL Configuration Wizard (Create, Packet Type) Window
Description
Select to create/update a MAC ACL.
Select to create/update an IPv4 ACL.
Select to create/update an IPv6 ACL.
424