D-Link DGS-3630 Series Reference Manual page 334
Layer 3 stackable managed switch web ui reference guide
Hide thumbs
Also See for DGS-3630 Series:
- Reference manual (184 pages) ,
- Hardware installation manual (71 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
SA Filter Request
Minimum TTL
SA Cache Maximum
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
After clicking the Show Detail button, the following page will appear.
Click the Back button to return to the previous window.
Description
messages to a specified peer. By specifying this string, the router only forwards
SA messages that match (S, G) pairs defined in the standard IP access list to a
specified peer.
Select the Configured option and enter the SA filter request string here. This
string can be up to 32 characters long. The router will process all SA request
messages from a specified peer. By not specifying this string, the router will stop
processing Source-Active request messages from a specified peer. By specifying
this string, the router only processes SA request messages that request groups
that are defined in the standard IP access list from a specified peer.
Enter the minimum TTL time value here. The range is from 0 to 225. When the SA
messages are sent from MSDP peers, If the Time-To-Live (TTL) value of
multicast data packets in SA message will be decreased, if the decreased TTL
value is smaller than minimum TTL value of the MSDP peer the SA message was
sent to, the SA will not be sent out. Select the Default option to use the default
value which is 0.
Enter the maximum SA cache value here. The range is from 0 to 8192. When the
maximum number of SA cache entries is configured to zero, the Switch cannot
learn a SA cache entry from the peer. When the maximum number of SA cache
entries is configured to be smaller than the existing SA cache entries, the older
existing SA cache entries will be removed until the number of SA cache entries is
equal to the maximum number. Select the None option to specify that no
limitation is applied for the number of Source-Active cache entries.
Figure 6-153 MSDP Peer Settings (Show Detail) Window
322
Advertisement
Table of Contents
