D-Link DGS-3630 Series Reference Manual page 532

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Level Type
PPS Rise
PPS Low
Click the Apply button to accept the changes made.
After selecting the Kbps option as the Level Type, the following parameters are available.
The additional fields that can be configured in Storm Control Port Settings are described below:
Parameter
KBPS Rise
KBPS Low
Click the Apply button to accept the changes made.
After selecting the Level option as the Level Type, the following parameters are available.
The additional fields that can be configured in Storm Control Port Settings are described below:
Parameter
Level Rise
Level Low
Description
rise threshold is reached. Selecting Drop specifies to discards packets that
exceed the risen threshold.
Select the level type option here. Options to choose from are PPS, Kbps, and
Level.
Enter the rise packets per second value here. This option specifies the rise
threshold value in packets count per second. This value must be between 1 and
2147483647 packets per second. If the low PPS value is not specified, the default
value is 80% of the specified risen PPS.
Enter the low packets per second value here. This option specifies the low
threshold value in packets count per second. This value must be between 1 and
2147483647 packets per second. If the low PPS value is not specified, the default
value is 80% of the specified risen PPS.
Figure 9-85 Storm Control (Level Type - Kbps) Window
Description
Enter the rise KBPS value used here. This option specifies the rise threshold
value as a rate of kilobits per second at which traffic is received on the port. This
value must be between 1 and 2147483647 Kbps.
Enter the low KBPS value used here. This option specifies the low threshold value
as a rate of kilobits per second at which traffic is received on the port. This value
must be between 1 and 2147483647 Kbps. If the low KBPS is not specified, the
default value is 80% of the specified risen KBPS.
Figure 9-86 Storm Control (Level Type - Level) Window
Description
Enter the rise level value used here. This option specifies the rise threshold value
as a percentage of the total bandwidth per port at which traffic is received on the
port. This value must be between 1% and 100%.
Enter the low level value used here. This option specifies the low threshold value
as a percentage of the total bandwidth per port at which traffic is received on the
port. This value must be between 1% and 100%. If the low level is not specified,
the default value is 80% of the specified risen level.
520