System Log Discriminator Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Severity
Discriminator Name
Write Delay
Click the Apply button to accept the changes made.
The fields that can be configured for Console Log Settings are described below:
Parameter
Console Log State
Severity
Discriminator Name
Click the Apply button to accept the changes made.
The fields that can be configured for SMTP Log Settings are described below:
Parameter
SMTP Log State
Severity
Discriminator Name
Click the Apply button to accept the changes made.

System Log Discriminator Settings

This window is used to display and configure the system log discriminator settings.
To view the following window, click System > System Log > System Log Discriminator Settings, as shown below:
Description
interfaces this value is from 1 to 4094.
Description
Select whether the enable or disable the global buffer log state here. Options to
choose from are Enable, Disabled, and Default. When selecting the Default
option, the global buffer log state will follow the default behavior.
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to filter
buffer log messages based on the filtering criteria specified within that profile.
Enter the log write delay value here. This value must be between 0 and 65535
seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable
the write delay feature.
Description
Select whether the enable or disable the global console log state here.
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to filter
console log messages based on the filtering criteria specified within that profile.
Description
Select whether the enable or disable the global SMTP log state here.
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to filter
SMTP log messages based on the filtering criteria specified within that profile.
16