Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Unit
From Port - To Port
Click the Find button to find and display entries based on the selections made.
IP Route Filter
Route Map
This window is used to display and configure the route map settings.
To view the following window, click L3 Features > IP Route Filter > Route Map, as shown below:
The fields that can be configured are described below:
Parameter
Route Map Name
Direction
Sequence ID
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button in the Match Clauses column, the following page will appear.
Description
Select the Switch unit that will be used for this display here.
Select the range of ports that will be used for this display here.
Figure 6-84 Route Map Window
Description
Enter the route map name here. This name can be up to 16 characters long.
Select the direction for this rule here. Options to choose from are Permit and
Deny.
Permit - Specifies that routes that match the rule entry are permitted.
•
Deny - Specifies that routes that match the rule entry are denied.
•
Enter the sequence ID for this rule here. The range is from 1 to 65535.
239
Advertisement
Table of Contents
