D-Link DGS-3630 Series Reference Manual page 405

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN
VRID
Address Family
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to find and display an entry based on the information entered.
Click the Edit button to configure more detailed settings of the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will appear:
The fields that can be configured are described below:
Figure 6-243 VRRPv3 Settings Window
Description
Enter the ID of the VLAN interface that will be used here. The range is from 1 to
4094.
Enter the virtual router ID used to identify the VRRP group here. The range is
from 1 to 255.
Select the address family used here. Option to choose from are:
• IPv4 - Specifies to create an IPv4 virtual router.
• IPv6 - Specifies to create an IPv6 virtual router.
Enter the name of the VLAN interface that will be used in the display here. This
string can be up to 12 characters long.
Figure 6-244 VRRPv3 Settings (Edit) Window
393