Arp Aging Time; Static Arp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

ARP Aging Time

This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
The fields that can be configured are described below:
Parameter
Timeout
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Static ARP

This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
The fields that can be configured are described below:
Parameter
VRF Name
IP Address
Hardware Address
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Figure 6-2 ARP Aging Time Window
Description
After click the Edit button, enter the ARP aging timeout value here.
Figure 6-3 Static ARP Window
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Enter the IP address that will be associated with the MAC address here.
Enter the MAC address that will be associated with the IP address here.
215