D-Link DGS-3630 Series Reference Manual page 589

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
VC ID
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the available entries.
Click the Edit button to configure more detailed settings associated with the specific entry.
Click the Show Detail button to view more detailed information about the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Click the Back button to return to the previous window.
The fields that can be configured for PW Settings are described below:
Parameter
PW Name
Click the Apply button to accept the changes made.
The fields that can be configured for PW Redundancy Settings are described below:
Parameter
Peer
VC ID
Delay
Description
Enter the Pseudo-Wire (PW) service instance ID here. The range is from 1 to
4294967295.
Figure 12-2 VPWS Settings (Edit) Window
Description
Select and enter the Pseudo-Wire (PW) name here. This name can be up to 64
characters long. Select the None option to use the default setting.
Description
Enter the peer LSR ID here that is used to identify the other end Provider Edge
(PE).
Enter the PW service instance ID here. The range is from 1 to 4294967295.
Enter the delay value here. This is to switch back to the primary PW with the
577