D-Link DGS-3630 Series Reference Manual page 583

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Add button to add a new entry.
Click the Delete button to remove the specific entry.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Add button, the following page will appear.
The fields that can be configured are described below:
Parameter
CoS
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Outbound CoS to EXP Settings tab, the following page will appear.
Figure 11-18 MPLS QoS Settings (Edit) Window
Figure 11-19 MPLS QoS Settings (Edit, Add) Window
Description
Select the list of CoS values (on the right) to be mapped to EXP values (on the
left) here. This feature is used to configure the Class of Service (CoS) to the
Experimental bits (EXP) mapping of the policy. The range is from 0 to 7. Select
the Default option to use the default value.
571