Quality Of Service (Qos); Basic Settings; Port Default Cos; Port Scheduler Method - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
7.

Quality of Service (QoS)

Basic Settings

Advanced Settings
QoS PFC
WRED
iSCSI
Basic Settings

Port Default CoS

This window is used to display and configure the port default CoS settings.
To view the following window, click QoS > Basic Settings > Port Default CoS, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Default CoS
Click the Apply button to accept the changes made.

Port Scheduler Method

This window is used to display and configure the port scheduler method settings. To view the following window, click
QoS > Basic Settings > Port Scheduler Method, as shown below:
Figure 7-1 Port Default CoS Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the default CoS option for the port(s) specified here. Options to choose
from are 0 to 7. Select the Override option to override the CoS of the packets.
The default CoS will be applied to all incoming packets, tagged or untagged,
received by the port. Select the None option to specify that the CoS of the
packets will be the packet's CoS if the packets are tagged, and will be the port
default CoS if the packet is untagged.
395