Ipv6 Neighbor - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the field that can be configured for Gratuitous ARP Send Interval is described below:
Parameter
Interval Time
Click the Apply button to accept the changes made.

IPv6 Neighbor

This window is used to display and configure the IPv6 neighbor settings.
To view the following window, click L3 Features > IPv6 Neighbor, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
IPv6 Address
MAC Address
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information for the specific interface.
Click the Clear All button to clear all the dynamic IPv6 neighbor information in this table.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Description
gratuitous ARP packets. The gratuitous ARP packet is sent by a source IP
address and is identical to the IP that the packet is querying.
Description
Enter the gratuitous ARP sending interval time, in seconds, here.
Figure 6-7 IPv6 Neighbor Window
Description
Enter the VLAN interface ID here.
Enter the IPv6 address.
Enter the MAC address.
218