Ssl Service Policy; Sftp Server Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.

SSL Service Policy

This window is used to display and configure the SSL service policy settings.
To view the following window, click Security > SSL > SSL Service Policy, as shown below:
The fields that can be configured are described below:
Parameter
Policy Name
Session Cache Timeout
Secure Trustpoint
Cipher Suites
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.

SFTP Server Settings

This window is used to display and configure the Secure File Transfer Protocol (SFTP) server settings. SFTP is a
remotely secure file transfer protocol over a reliable data stream. Because SFTP itself does not provide authentication
and security, the SFTP server runs as a sub-system of the SSH server.
Figure 9-96 SSL Service Policy Window
Description
Enter the SSL service policy name here. This name can be up to 32 characters
long.
Enter the session cache timeout value used here. This value must be between 60
and 86400 seconds. By default, this value is 600 seconds.
Enter the secure trust point name here. This name can be up to 32 characters
long.
Select the cipher suites that will be associated with this profile here.
528