Stp Global Settings - D-Link DGS-3630 Series Reference Manual

Layer 3 stackable managed switch web ui reference guide

Hide thumbs Also See for DGS-3630 Series:

Table of Contents

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

STP Global Settings

This window is used to display and configure the global STP settings.

To view the following window, click L2 Features > STP > STP Global Settings, as shown below:

The field that can be configured for STP State is described below:

Click the Apply button to accept the changes made.

The fields that can be configured for STP Traps are described below:

STP New Root Trap

STP Topology Change Trap

Click the Apply button to accept the changes made.

The fields that can be configured for STP Mode are described below:

Click the Apply button to accept the changes made.

The fields that can be configured for STP Priority are described below:

Figure 5-50 STP Global Settings Window

Select to enable or disable the global STP state here.

Select to enable or disable the STP New Root Trap option here.

Select to enable or disable the STP Topology Change Trap option here.

Select the STP mode used here. Options to choose from are MSTP, RSTP, and

Select the STP priority value here. This value is between 0 and 61440. By default,