D-Link DGS-3630 Series Reference Manual page 197

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
VID
Configuration
Unit
From Port - To Port
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
The fields that can be configured in IGMP Snooping Mrouter Table are described below:
Parameter Description
VID Enter the VLAN ID used here. The range is from 1 to 4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Snooping Statistics Settings
This window is used to view and clear the IGMP snooping related statistics.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Statistics Settings, as shown below:
The fields that can be configured in IGMP Snooping Statistics Settings are described below:
Parameter
Statistics
VID
Unit
Description
Enter the VLAN ID used here. The range is from 1 to 4094.
Select the port configuration. Options to choose from are Port, and Forbidden
Port.
• Port - Select to have the configured ports to be static multicast router ports.
• Forbidden Port - Select to have the configured ports not to be multicast
router ports.
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Figure 5-78 IGMP Snooping Statistics Settings Window
Description
Select the interface here. Options to choose from are All, VLAN, and Port.
Enter a VLAN ID between 1 and 4094. This is available when VLAN is selected in
the Statistics drop-down list.
Select the Switch unit that will be used for this configuration here. This is available
185