D-Link DGS-3630 Series Reference Manual page 337

Layer 3 stackable managed switch web ui reference guide
Hide thumbs Also See for DGS-3630 Series:
Table of Contents

Advertisement

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in IP Multicast Routing Global State are described below:
Parameter
Global State
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Boundary are described below:
Parameter
VID
ACL Name
Filter Mode
Action
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Interface Table are described below:
Parameter
Interface Name
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-157 IP Multicast Global Settings Window
Description
Select to globally enable or disable the IP multicast routing feature here. When IP
multicast routing is disabled, the system will stop routing multicast packets even
though the multicast routing protocol is enabled.
Description
Enter the VLAN ID that will be used here. The range is from 1 to 4094.
Enter the name of the standard IP access list that will be used here. This name
can be up to 32 characters long. Click the Please Select button to select a pre-
configured access list and use it here.
Select the filter mode here. Options to choose from are:
• Both - Specifies to filter both incoming and outgoing traffic.
• Out - Specifies to filter the PIM join message or IGMP join message arriving
at the interface. This filtering prevent the interface from becoming an
outgoing interface for the denied (*,G) or (S,G) entries.
• In - Specifies to filter the multicast user traffic arriving at the interface based
on the specified access list. This filters the multicast traffic for the specific
group traffic or for specific groups from the specific source.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Description
Enter the interface name that will be used for the search here.
325

Advertisement

Table of Contents
loading

Table of Contents