Isis Redistribute Isis Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Metric Type
Route Map
Level
Click the Apply button to accept the changes made.
Click the Delete button to remove a specific entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

ISIS Redistribute ISIS Settings

This window is used to display and configure the redistribute ISIS settings. This is used redistribute ISIS routes from
level 1 into level 2 and vice versa.
To view the following window, click L3 Features > ISIS > ISIS Redistribute ISIS Settings, as shown below:
The fields that can be configured are described below:
Parameter
Protocol
Area Tag
From
Into
Distribute List
Description
Select the metric type of the redistributed routes here. Options to choose from
are:
• None - The metric type is not specified.
• Internal - The redistributed routes advertised with internal metrics.
• External - The redistributed routes advertised with external metrics.
Enter the name of the route map that will be used here. This name can be up to
32 characters long.
Select the routing level that will be used here. Options to choose from are Level-
1, Level-1-2, and Level-2 Only.
Figure 6-227 ISIS Redistribute ISIS Settings Window
Description
Select the protocol that will be used here. Options to choose from are IPv4 and
IPv6.
Enter the ISIS area tag here. This can be up to 16 characters long.
Select the level of the routes that will be redistributed from here. Options to
choose from are Level-1 and Level-2.
Select the level of the routes that will be redistributed to here. Options to choose
from are Level-1 and Level-2.
Enter the name of the distribution list here. This name can be up to 32 characters
long.
380