Rmon; Rmon Global Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > SNMP > SNMP Context Mapping Table Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Context Name
Instance ID
Instance Name
VRF Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.

RMON

RMON Global Settings

This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the
SNMP function on the Switch.
To view the following window, click Management > RMON > RMON Global Settings, as shown below:
The fields that can be configured are described below:
Parameter
RMON Rising Alarm Trap
RMON Falling Alarm Trap
Click the Apply button to accept the changes made.
Figure 4-15 SNMP Context Mapping Table Settings Window
Description
Enter the SNMP View-based Access Control Model (VACM) context name here.
This name can be up to 32 characters long. The name must start with a letter and
end with a letter or digit. Interior characters can be letters, digits, and hyphens.
Enter the OSPF instance ID here. The range is from 1 to 65535.
Enter the ISIS routing area tag here. This name can be up to 12 characters long.
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Figure 4-16 RMON Global Settings Window
Description
Select this option to enable or disable the RMON Rising Alarm Trap Feature.
Select this option to enable or disable the RMON Falling Alarm Trap Feature.
46