D-Link DGS-3630 Series Reference Manual page 85

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCP Relay Port Settings
This window is used to display and configure the DHCP relay port settings.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Description
string or a hexadecimal value.

svlan - Indicates the outer VLAN ID. This can be either an ASCII
string or a hexadecimal value.

cvlan - Indicates the inner VLAN ID. This can be either an ASCII
string or a hexadecimal value.
○
: - Indicates the end of the formatted key sting. If a formatted key string
is the last parameter of the command, its ending character (":") can be
ignored. The space (0x20) between "%" and ":" will be ignored. Other
spaces will be encapsulated.
• ASCII strings can be any combination of formatted key strings and 0~9, a~z,
A~Z, !@#$%^&*()_+|-=\[]{};:'"/?.,<>`, and space characters. "\" is the escape
character. The special character after "\" is the character itself, for example,
"\%" is "%" itself, not the start indicator of a formatted key string. Spaces not
in the formatted key string will also be encapsulated.
• Hexadecimal values can be any combination of formatted key strings and
0~9, A~F, a~f, and space characters. The formatted key strings only support
keywords that support hexadecimal values. Spaces not in the formatted key
string will be ignored.
Figure 4-55 DHCP Relay Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
73