Configuration Backup To Rcp; Log Backup; Log Backup To Http - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

Configuration Backup to RCP

This window is used to initiate a configuration file backup to an RCP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to RCP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
RCP Server IP
User Name
VRF Name
Source File
Destination File
Click the Backup button to initiate the configuration file backup.

Log Backup

Log Backup to HTTP

This window is used to initiate a system log backup to a local PC using HTTP.
To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Log Type
Figure 15-17 Configuration Backup to RCP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the RCP server IP address here.
Enter the user name used for the RCP connection here. This name can be up to
32 characters long.
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Enter the source filename and path of the configuration file located on the Switch
here. This field can be up to 64 characters long. Select the running-config option
to back up the running configuration file from the Switch. Select the startup-
config option to back up the start-up configuration file from the Switch.
Enter the destination path and location where the configuration file should be
stored on the RCP server. This field can be up to 64 characters long.
Figure 15-18 Log Backup to HTTP Window
Description
Select the log type that will be backed up to the local PC using HTTP.
617