D-Link DGS-3630 Series Reference Manual page 321

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Hash Mask Length
Priority
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
PIM for IPv6 BSR Table
This window is used to view IPv6 PIM BSR information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 BSR Table, as shown below:
Figure 6-132 PIM for IPv6 BSR Candidate Settings Window
Description
Enter the VLAN interface name used here.
Enter the hash mask length for RP selection here. The range is from 0 to 128.
The mask (128 bits maximum) that is to be logically AND with the group address
before the hash function is executed. All groups with the same seed hash
(correspond) to the same RP. Therefore one RP can be derived for multiple
groups. Select the Default option to use the default value, which is 126.
Enter the priority value for the BSR candidate here. The range is from 0 to 255.
The BSR with the larger priority is preferred. If the priority values are the same,
the router with the larger IPv6 address is the BSR. Select the Default option to
use the default value, which is 64.
Figure 6-133 PIM for IPv6 BSR Table Window
309