L2 Protocol Tunnel - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Primary Port
Unit
Backup Port
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
NOTE: Flex Link and STP, ERPS and LBD are mutually exclusive.

L2 Protocol Tunnel

This window is used to display and configure the Layer 2 protocol tunnel settings.
To view the following window, click L2 Features > L2 Protocol Tunnel, as shown below:
Figure 5-67 L2 Protocol Tunnel (L2 Protocol Tunnel Global Setting) Window
The fields that can be configured are described below:
Parameter
CoS for Encapsulated
Packets
Drop Threshold
Figure 5-66 L2 Flex Links Window
Description
Select the Switch unit of the primary port here.
Select the primary port here.
Select the Switch unit of the backup port here.
Select the backup port here.
Description
Select the CoS value for encapsulated packets here. This value is between 0 and
7. Select the Default option to use the default value.
Enter the drop threshold value here. This value must be between 100 and 20000.
175