Firmware Upgrade From Tftp; Firmware Upgrade From Ftp - D-Link DGS-3630 Series Reference Manual
Layer 3 stackable managed switch web ui reference guide
Hide thumbs
Also See for DGS-3630 Series:
- Reference manual (184 pages) ,
- Hardware installation manual (71 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Unit
Source File
Destination File
Click the Upgrade button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
VRF Name
Source File
Destination File
Click the Upgrade button to initiate the firmware upgrade.
Firmware Upgrade from FTP
This window is used to initiate a firmware upgrade from an FTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from FTP, as
shown below:
Description
Select the Switch unit that will be used for this configuration here.
In this field the source firmware file's filename and path will be displayed after
selection. To navigate to the location of the firmware file located on the local PC,
either double click in the text box or click the Browse button.
Enter the destination path and location where the new firmware should be stored
on the Switch. This field can be up to 64 characters long.
Figure 15-3 Firmware Upgrade from TFTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Enter the source filename and path of the firmware file located on the TFTP
server here. This field can be up to 64 characters long.
Enter the destination path and location where the new firmware should be stored
on the Switch. This field can be up to 64 characters long.
607
Advertisement
Table of Contents
