D-Link DGS-3630 Series Reference Manual page 106

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in IP TFTP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured in IP FTP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured in IP RCP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
Figure 4-78 IP Source Interface Window
Description
Select to enable or disable the IP TFTP source interface state here.
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
Description
Select to enable or disable the IP FTP source interface state here.
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
Description
Select to enable or disable the IP RCP source interface state here.
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
94