DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in NTP State are described below:
Parameter
NTP State
Click the Apply button to accept the changes made.
The fields that can be configured in NTP Authentication State are described below:
Parameter
NTP Authentication State
Click the Apply button to accept the changes made.
The fields that can be configured in NTP Update Calendar are described below:
Parameter
NTP Update Calendar
Click the Apply button to accept the changes made.
The fields that can be configured in NTP Settings are described below:
Parameter
NTP Master Stratum
NTP Max Associations
Click the Apply button to accept the changes made.
Figure 4-69 NTP Global Settings Window
Description
Select to globally enable or disable the NTP feature here.
Description
Select to enable or disable the NTP authentication state here. When this feature
is enabled, networking nodes will not synchronize with the Switch unless it carries
one of the authentication keys.
Description
Select to enable or disable the NTP update calendar feature here. This is used to
periodically update the hardware clock from an NTP source.
Description
Enter the NTP master stratum value here. This is used to configure the Real-Time
Clock (RTC) as an NTP master clock when an external NTP is not available. The
range is from 1 to 15. Select the Default option to use the default value.
Enter the NTP maximum association value here. This is used to configure the
maximum number of NTP peers and clients on the Switch. The range is from 1 to
64.
87