D-Link DGS-3630 Series Reference Manual page 216

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in LLDP Global Settings are described below:
Parameter
LLDP State
LLDP Forward State
LLDP Trap State
LLDP-MED Trap State
Click the Apply button to accept the changes made.
The fields that can be configured in LLDP-MED Settings are described below:
Parameter
Fast Start Repeat
Count
Click the Apply button to accept the changes made.
The fields that can be configured in LLDP Configurations are described below:
Parameter
Message TX Interval
Figure 5-95 LLDP Global Settings Window
Description
Select this option to enable or disable the LLDP feature
Select this option to enable or disable LLDP forward state. When the LLDP State
is disabled and LLDP Forward Sate is enabled, the received LLDPDU packet will
be forwarded.
Select this option to enable or disable the LLDP trap state.
Select this option to enable or disable the LLDP-MED trap state.
Description
Enter the LLDP-MED fast start repeat count value. This value must be between 1 and
10.
Description
Enter the interval between consecutive transmissions of LLDP advertisements on
204