D-Link DGS-3630 Series Reference Manual page 289

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
After clicking the Process ID link (1), the following page will appear.
Click the OK button to close the window and return to the previous window.
OSPFv3 LSDB Table
This window is used to find and display the OSPFv3 LSDB information.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 LSDB Table, as shown below:
The fields that can be configured are described below:
Parameter
Process ID
LSDB Type
Figure 6-89 OSPFv3 Virtual Link Settings (Process ID) Window
Figure 6-90 OSPFv3 LSDB Table Window
Description
Enter the ID for an IPv6 OSPF routing process here. It is locally assigned and
should be unique for each IPv6 OSPF routing process on the router. The range is
from 1 to 65535.
Select the LSDB display type here. Options to choose from are All, Router,
Network, Prefix, Link, Inter-Area Prefix, Inter-Area Router, and External.
• All - Specifies to display all types of LSDB information.
• Router - Specifies to display information only about the router LSAs.
• Network - Specifies to display information only about the network LSAs.
277