D-Link DGS-3630 Series Reference Manual page 237

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Loopback
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
The fields that can be configured are described below:
Parameter
State
Description
IP Address
Mask
IPv6 Address
Link Local
Click the Back button to return to the previous window.
Figure 6-16 Loopback Interface Window
Description
Enter the loopback interface ID here. The range is from 1 to 8.
Figure 6-17 Loopback Interface (Edit) Window
Description
Select to enable or disable the loopback interface here.
Enter the description for the loopback interface here. This string can be up to 64
characters long.
Enter the IPv4 address associated with this loopback interface here.
Enter the IPv4 subnet mask associated with this loopback interface here.
Enter the IPv6 address associated with this loopback interface here.
Select this option to specify that the IPv6 address entered is the link-local IPv6
address.
225