Ipv4 - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

IPv4

DHCPv4 Snooping
DHCP Snooping Global Settings
This window is used to display and configure the global DHCP snooping settings.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Global
Settings, as shown below:
The fields that can be configured are described below:
Parameter
DHCP Snooping
Information Option Allow
Untrusted
Source MAC Verification
Station Move Deny
Click the Apply button to accept the changes made.
DHCP Snooping Port Settings
This window is used to display and configure the DHCP snooping port settings.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Port Settings,
as shown below:
Figure 9-39 DHCP Snooping Global Settings Window
Description
Select to enable or disable the global DHCP snooping status.
Select to enable or disable the option to globally allow DHCP packets with the
relay Option 82 on the untrusted interface.
Select to enable or disable the verification that the source MAC address in a
DHCP packet matches the client hardware address.
Select to enable or disable the DHCP snooping station move state. When DHCP
snooping station move is enabled, the dynamic DHCP snooping binding entry with
the same VLAN ID and MAC address on the specific port can move to another
port if it detects that a new DHCP process belong to the same VLAN ID and MAC
address.
481