D-Link DGS-3630 Series Reference Manual page 502

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Binding, as
shown below:
The fields that can be configured in IP Source Binding Settings are described below:
Parameter
MAC Address
VID
IP Address
Unit
From Port - To Port
Click the Apply button to accept the changes made.
The fields that can be configured in IP Source Binding Entry are described below:
Parameter
Unit
From Port - To Port
IP Address
MAC Address
VID
Type
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 9-52 IP Source Guard Binding Window
Description
Enter the MAC address of the binding entry here.
Enter the VLAN ID of the binding entry here.
Enter the IP address of the binding entry here.
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Description
Select the Switch unit that will be used for this query here.
Select the appropriate port range used for the query here.
Enter the IP address of the binding entry here.
Enter the MAC address of the binding entry here.
Enter the VLAN ID of the binding entry here.
Select the type of binding entry to find here. Options to choose from are All,
DHCP Snooping, and Static.
• Selecting All specifies that all the DHCP binding entries will be displayed.
• Selecting DHCP Snooping specifies to display the IP-source guard binding
entry learned by DHCP binding snooping.
• Selecting Static specifies to display the IP-source guard binding entry that is
manually configured.
490