D-Link DGS-3630 Series Reference Manual page 495

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
State
Click the Apply button to accept the changes made.
DHCP Snooping Database
This window is used to display and configure the DHCP snooping database settings.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Database, as
shown below:
The fields that can be configured in DHCP Snooping Database are described below:
Parameter
Write Delay
Click the Reset button to reset the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured in Store DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
The fields that can be configured in Load DHCP Snooping Database are described below:
Description
Select to enable or disable the DHCP snooping VLAN setting here.
Figure 9-42 DHCP Snooping Database Window
Description
Enter the write delay time value here. This value must be between 60 and 86400
seconds. By default, this value is 300 seconds.
Description
Select the location from the drop-down list and enter the URL where the DHCP
snooping database will be stored to here. Locations to choose from are TFTP,
FTP, and Flash. An example URL is given.
483