Dhcp Server Screening Global Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
When the DHCP Server Screening function is enabled on a port, all DHCP server packets received on this ports will
be redirected to the CPU for a software-based check. Legal DHCP server packets will be forwarded out and illegal
DHCP server packets will be dropped.
When DHCP Server Screening function is enabled all DHCP Server packets will be filtered from a specific port.

DHCP Server Screening Global Settings

This window is used to display and configure the global DHCP server screening settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening Global Settings,
as shown below:
The fields that can be configured in Trap Settings are described below:
Parameter
Trap State
Click the Apply button to accept the changes made.
The fields that can be configured in Profile Settings are described below:
Parameter
Profile Name
Client MAC
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Delete Profile button to remove the specified profile.
The fields that can be configured in Log Information are described below:
Parameter
Log Buffer Entries
Figure 9-64 DHCP Server Screening Global Settings Window
Description
Select to enable or disable the DHCP server screening trap here.
Description
Enter the DHCP server screening profile name here. This name can be up to 32
characters long.
Enter the MAC address used here.
Description
Enter the logged buffer entries value here. This value must be between 10 and
1024. By default, this value is 32.
499