D-Link DGS-3630 Series Reference Manual page 398

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button in the Match Clauses column, the following page will appear.
The fields that can be configured are described below:
Parameter
Action
Interface Name
IP Address Prefix List
IP Address ACL
IPv6 Address Prefix List
IPv6 Address ACL
IP Next Hop Prefix List
IP Next Hop ACL
IPv6 Next Hop Prefix List
Figure 6-237 Route Map (Match Clauses, Edit) Window
Description
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select and enter the interface name that will be used here. This option is used to
define a clause to match the route's outgoing interface.
Select and enter the name of the IP prefix list here. This option is used to define a
clause to match the route based on the IP prefix list. This string can be up to 32
characters long.
Select and enter the standard or extended IP access list name here. This option is
used to define a clause to match the route based on the standard or extended IP
access list. This string can be up to 32 characters long.
Select and enter the name of the IPv6 prefix list here. This option is used to define
a clause to match the route based on the IPv6 prefix list. This string can be up to
32 characters long.
Select and enter the standard or extended IPv6 access list name here. This
option is used to define a clause to match the route based on the standard or
extended IPv6 access list. This string can be up to 32 characters long.
Select and enter the name of the next hop IP prefix list here. This option is used
to define a clause to match the route's next hop based on the next hop IP prefix
list. This string can be up to 32 characters long.
Select and enter the standard IP access list name here. This option is used to
define a clause to match the route's next hop based on the standard IP access
list. This string can be up to 32 characters long.
Select and enter the name of the next hop IPv6 prefix list here. This option is used
to define a clause to match the route's next hop based on the next hop IPv6 prefix
list. This string can be up to 32 characters long.
386