Port Configuration; Port Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in Environment Trap Settings are described below:
Parameter
Fan Trap
Power Trap
Temperature Trap
Click the Apply button to accept the changes made.
The fields that can be configured in Environment Temperature Threshold Settings are described below:
Parameter
Unit
Thermal
High Threshold
Low Threshold
Click the Apply button to accept the changes made.

Port Configuration

Port Settings

This window is used to display and configure the Switch's port settings.
NOTE: The 10M and 100M speed options are only applicable when connecting to the Management
Port (Mgmt 0).
To view the following window, click System > Port Configuration > Port Settings, as shown below:
Figure 3-3 Peripheral Settings Window
Description
Select to enable or disable the fan trap state for waning fan event (fan failed or
fan recover).
Select to enable or disable the power trap state for waning power event (power
failed or power recover).
Select to enable or disable the temperature trap state for warning temperature
event (temperature thresholds exceeded or temperature recover).
Description
Select the Switch unit that will be used for this configuration here.
Select the thermal sensor ID.
Enter the high threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the Default check box to return to the
default value.
Enter the low threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the Default check box to return to the
default value.
8