D-Link DGS-3630 Series Reference Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DGS-3630 SERIES
  6. Reference manual

D-Link DGS-3630 Series Reference Manual

Web ui reference guide, layer 3 stackable managed switch
Hide thumbs Also See for DGS-3630 Series:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DGS-3630 Series

Summary of Contents for D-Link DGS-3630 Series

  • Page 2 Information in this document is subject to change without notice. Reproduction of this document in any manner, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.

  • Page 3: Table Of Contents

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Table of Contents Introduction ................................1 Audience ................................. 1 Other Documentation .............................. 1 Conventions ................................1 Notes, Notices, and Cautions ..........................1 Web-based Switch Configuration ........................3 Management Options ............................. 3 Areas of the User Interface..........................
  • Page 4 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Community Table Settings ........................38 SNMP Group Table Settings ........................... 39 SNMP Engine ID Local Settings ........................40 SNMP User Table Settings ..........................40 SNMP Host Table Settings ..........................42 RMON ...................................
  • Page 5 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Accounting Settings ............................87 RADIUS ................................89 RADIUS Global Settings ..........................89 RADIUS Server Settings ..........................90 RADIUS Group Server Settings ........................90 RADIUS Statistic ............................. 91 TACACS+ ................................92 TACACS+ Server Settings ..........................
  • Page 6 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Firmware Upgrade from RCP ........................124 Firmware Upgrade from SFTP ........................125 Firmware Backup to HTTP ..........................125 Firmware Backup to TFTP ..........................126 Firmware Backup to FTP ..........................126 Firmware Backup to RCP ..........................
  • Page 7 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide...

  • Page 8: Introduction

    Switch by using the Web User Interface (Web UI). The Web UI is the secondary management interface to the DGS-3630 Series Switch, which will be generally be referred to simply as the “Switch” within this manual. This manual is written in a way that assumes that you already have the experience and knowledge of Ethernet and modern networking principles for Local Area Networks.
  • Page 9 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide NOTICE: A notice indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A caution indicates a potential for property damage, personal injury, or death.

  • Page 10: Web-Based Switch Configuration

    Switch. Alternatively, the Switch can also be managed, in-band, by using a Telnet connection to any of the LAN ports on the Switch. The command line interface provides complete access to all Switch management features. Refer to the DGS-3630 Series CLI Reference Guide for more detailed information about the CLI. SNMP-based Management The Switch can be managed with an SNMP-compatible Network Management System (NMS).
  • Page 11 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Logging into the Web UI To access the Web UI open a standard web browser and enter the IP address of the Switch into the address bar of the browser and press the ENTER key.

  • Page 12: Areas Of The User Interface

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Web User Interface (Web UI) The Web UI provides access to various Switch configuration and management windows. It allows the user to view performance statistics, and permits graphical monitoring of the system’s status.

  • Page 13: System

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide System Device Information System Information Settings Peripheral Settings Port Configuration Interface Description Loopback Test System Log Time and SNTP Time Range USB Console Settings Device Information In the Device Information section, the user can view a list of basic information regarding the Switch. It appears automatically when you log on to the Switch.

  • Page 14: Peripheral Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > System Information Settings, as shown below: Figure 3-2 System Information Settings Window The fields that can be configured in System Information Settings are described below:...

  • Page 15: Port Configuration

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Peripheral Settings, as shown below: Figure 3-3 Peripheral Settings Window The fields that can be configured in Environment Trap Settings are described below:...
  • Page 16 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Port Configuration > Port Settings, as shown below: Figure 3-4 Port Settings Window The fields that can be configured are described below:...

  • Page 17: Port Status

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description The Master setting will allow the port to advertise capabilities related to duplex, speed and physical layer type. The master setting will also determine the master and slave relationship between the two connected physical layers. This relationship is necessary for establishing the timing control between the two physical layers.

  • Page 18: Port Gbic

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Port Configuration > Port Status, as shown below: Figure 3-5 Port Status Window Port GBIC This window is used to view active GBIC information found on each applicable physical port of this Switch.

  • Page 19: Jumbo Frame

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Port Configuration > Port Auto Negotiation, as shown below: Figure 3-7 Port Auto Negotiation Window Jumbo Frame This window is used to display and configure the jumbo frame size and settings. The Switch supports jumbo frames.

  • Page 20: Interface Description

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Interface Description This window is used to display the status, administrative status, and description of each port on the Switch. To view the following window, click System > Interface Description, as shown below: Figure 3-9 Interface Description Window Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

  • Page 21: Poe

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description From Port - To Port Select the appropriate port range used for the configuration here. Loopback Mode Select the loopback mode here. Options to choose from are: •...

  • Page 22: Poe Status

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE System, as shown below: Figure 3-11 PoE System Window The fields that can be configured for PoE System are described below:...

  • Page 23: Poe Configuration

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE Status, as shown below: Figure 3-13 PoE Status Window The fields that can be configured for PoE Status are described below:...

  • Page 24: Pd Alive

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE Configuration, as shown below: Figure 3-14 PoE Configuration Window The fields that can be configured for PoE Configuration are described below:...

  • Page 25: Poe Statistics

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PD Alive, as shown below: Figure 3-15 PD Alive Window The fields that can be configured for PD Alive Configuration are described below:...

  • Page 26: Poe Measurement

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE Statistics, as shown below: Figure 3-16 PoE Statistics Window Click the Clear All button to clear PoE statistics for all ports.
  • Page 27 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > System Log > System Log Settings, as shown below: Figure 3-18 System Log Settings Window The fields that can be configured for Log State are described below:...

  • Page 28: System Log Discriminator Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Severity Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).

  • Page 29: System Log Server Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Action Select the facility behavior option and the type of facility that will be associated with the selected behavior here. Behavior options to choose from are Drops and Includes.

  • Page 30: System Log

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description syslog Messages generated internally by the SYSLOG Line printer sub-system news Network news sub-system uucp UUCP sub-system clock1 Clock daemon auth2 Security/authorization messages FTP daemon NTP subsystem...

  • Page 31: Time And Sntp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Time and SNTP Clock Settings This window is used to display and configure the time settings for the Switch.
  • Page 32 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Time and SNTP > Time Zone Settings, as shown below: Figure 3-23 Time Zone Settings Window The fields that can be configured are described below:...

  • Page 33: Sntp Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description From: Time Select the time of the day that summer time will start. To: Week of the Month Select week of the month that summer time will end.

  • Page 34: Time Range

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in SNTP Global Settings are described below: Parameter Description SNTP State Select this option to enable or disable SNTP. Poll Interval Enter the synchronizing interval in seconds. The value is from 30 to 99999 seconds.

  • Page 35: Usb Console Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Delete Periodic button to delete the periodic entry. Click the Delete button to delete the specified entry. USB Console Settings This window is used to display and configure the USB console settings.

  • Page 36: Management

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Management Command Logging User Accounts Settings CLI Alias Settings Password Encryption Password Recovery Login Method SNMP RMON Telnet/Web Session Timeout File System Reboot Schedule Settings Command Logging This window is used to display and configure the command logging function. The command logging function is used to log the commands that have successfully been configured on the Switch via the command line interface.
  • Page 37 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > User Accounts Settings, as shown below: After selecting the User Management Settings tab, the following page will appear. Figure 4-2 User Accounts Settings Window...

  • Page 38: Cli Alias Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After selecting the Edit button, the following page will appear. Figure 4-4 User Privilege Window The fields that can be configured are described below: Parameter Description Action Select to enable or disable user level security.

  • Page 39: Password Encryption

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Password Encryption This window is used to display and configure whether to save the encryption of the password in the configuration file.

  • Page 40: Login Method

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description can be disabled to allow local authentication. The running configuration can then be saved as the startup configuration. A reboot is required. Click the Apply button to accept the changes made.

  • Page 41: Snmp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in Login Method are described below: Parameter Description Login Method After clicking the Edit button, this parameter can be configured. Select the login method for the specified application here.

  • Page 42: Snmp Global Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The SNMPv3 protocol uses a more sophisticated authentication process that is separated into two parts. The first part maintains a list of users and their attributes that are allowed to act as SNMP managers. The second part describes what each user in that list can do as an SNMP manager.

  • Page 43: Snmp Linkchange Trap Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in SNMP Global Settings are described below: Parameter Description SNMP Global State Select this option to enable or disable the SNMP feature. SNMP Response Broadcast...

  • Page 44: Snmp View Table Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description From Port - To Port Select the appropriate port range used for the configuration here. Trap Sending Select this option to enable or disable the sending of the SNMP notification traps that are generated by the system.

  • Page 45: Snmp Community Table Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Community Table Settings This window is used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch. One or more of the following characteristics can be associated with the community string: •...

  • Page 46: Snmp Group Table Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Group Table Settings An SNMP group created with this table maps SNMP users to the views created in the SNMP View Table Settings window. To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown below:...

  • Page 47: Snmp Engine Id Local Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Engine ID Local Settings The Engine ID is a unique identifier used for SNMPv3 implementations on the Switch. To view the following window, click Management > SNMP > SNMP Engine ID Local Settings, as shown below:...
  • Page 48 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Group Name Enter the SNMP group name to which the user belongs. This name can be up to 32 characters long. Spaces are not allowed. SNMP Version Select the SNMP version.

  • Page 49: Snmp Host Table Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Host Table Settings This window is used to display and configure the recipient of the SNMP notification. To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below:...

  • Page 50: Rmon

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide RMON RMON Global Settings This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the SNMP function on the Switch.

  • Page 51: Rmon History Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Show Detail button, the following window will appear.

  • Page 52: Rmon Alarm Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following window will appear. Figure 4-21 RMON History Settings (Show Detail) Window Click the Back button to return to the previous window.

  • Page 53: Rmon Event Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. RMON Event Settings This window is used to display and configure event entries.

  • Page 54: Telnet/Web

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Back button to return to the previous window. Telnet/Web This window is used to display and configure Telnet and Web settings on the Switch. To view the following window, click Management > Telnet/Web, as shown below:...

  • Page 55: File System

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > Session Timeout, as shown below: Figure 4-26 Session Timeout Window The fields that can be configured are described below: Parameter Description Web Session Timeout Enter the web session timeout value here.
  • Page 56 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > File System, as shown below: Figure 4-27 File System Window The fields that can be configured are described below: Parameter Description Enter the path string.

  • Page 57: Reboot Schedule Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide NOTE: If the boot image file is damaged, the Switch will automatically use the backup image file in the next boot up. Click the Copy button to see the following window.
  • Page 58 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Time Interval Select and enter the reboot schedule time interval value here. The reboot will be initiated after the specified time interval has passed. The range is from 1 to 43200 minutes (30 days).

  • Page 59: Layer 2 Features

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Layer 2 Features VLAN Link Aggregation Static FDB Unicast Static FDB This window is used to display and configure the static unicast forwarding settings on the Switch. To view the following window, click L2 Features > FDB > Static FDB > Unicast Static FDB, as shown below:...

  • Page 60: Mac Address Table Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below:...
  • Page 61 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After selecting the MAC Address Port Learning Settings tab option, at the top of the page, the following page will be available. Figure 5-4 MAC Address Table Settings (MAC Address Port Learning Settings) Window...

  • Page 62: Mac Address Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Status Select to enable or disable the MAC address learning function on the VLAN(s) specified here. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered.

  • Page 63: Mac Notification

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide MAC Notification This window is used to display and configure MAC notification. To view the following window, click L2 Features > FDB > MAC Notification, as shown below: Figure 5-7 MAC Notification (MAC Notification Settings) Window...

  • Page 64: Vlan

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After selecting the MAC Notification History tab, at the top of the page, the following page will be available. Figure 5-8 MAC Notification (MAC Notification History) Window On this page, a list of MAC notification messages will be displayed.

  • Page 65: Vlan Interface

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide VLAN Interface This window is used to display and configure the VLAN interface settings. To view the following window, click L2 Features > VLAN > VLAN Interface, as shown below: Figure 5-10 VLAN Interface Window Click the Show Detail button to view more detailed information about the VLAN on the specific interface.
  • Page 66 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After click the Edit button, the following page will appear. This is a dynamic page that will change when a different VLAN Mode is selected. When Access was selected as the VLAN Mode, the following page will appear.
  • Page 67 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description VLAN Mode Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Acceptable Frame Select the acceptable frame behavior option here.

  • Page 68: L2Vlan Interface Description

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Native VLAN Tick this option to enable the native VLAN function. Also select if this VLAN supports Untagged or Tagged frames. After ticking the Native VLAN option the following parameter will be available.

  • Page 69: Stp

    However, as IEEE 802.1D-2004 RSTP and IEEE 802.1Q-2005 MSTP have been recently introduced to D-Link managed Ethernet Switches, a brief introduction to the technology is provided below followed by a description of how to set up IEEE 802.1D-1998 STP, IEEE 802.1D-2004 RSTP, and IEEE 802.1Q-2005 MSTP.

  • Page 70: Stp Global Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Listening or in the RSTP/MSTP port state Discarding, there is no functional difference, the port is not active in the network topology. Table 7-3 below compares how the three protocols differ regarding the port state transition.
  • Page 71 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > STP > STP Global Settings, as shown below: Figure 5-16 STP Global Settings Window The field that can be configured for STP State is described below:...

  • Page 72: Stp Port Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured for STP Configuration are described below: Parameter Description Bridge Max Age Enter the bridge Maximum Age value here. This value must be between 6 and 40 seconds.
  • Page 73 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > STP > STP Port Settings, as shown below: Figure 5-17 STP Port Settings Window The fields that can be configured are described below:...

  • Page 74: Mst Configuration Identification

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description TCN Filter Select to enable or disable the TCN Filter option. When a port is set to the TCN filter mode, the TC event received by the port will be ignored. By default, this option is Disabled.

  • Page 75: Stp Instance

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured for MST Configuration Identification are described below: Parameter Description Configuration Name Enter the MST. This name uniquely identifies the MSTI (Multiple Spanning Tree Instance).

  • Page 76: Mstp Port Information

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Instance Priority After clicking the Edit button, enter the Instance Priority value here. The range is from 0 to 61440.
  • Page 77 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 5-21 Example of Port Trunk Group The Switch treats all ports in a trunk group as a single port. Data transmitted to a specific host (destination address) will always be transmitted over the same port in a trunk group. This allows packets in a data stream to arrive in the same order they were sent.
  • Page 78 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide This window is used to display and configure the link aggregation settings. To view the following window, click L2 Features > Link Aggregation, as shown below: Figure 5-22 Link Aggregation Window...
  • Page 79 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following page will be available. Figure 5-23 Link Aggregation (Channel Detail) Window The fields that can be configured are described below: Parameter...

  • Page 80: Layer 3 Features

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Layer 3 Features IPv6 Neighbor Interface IPv4 Static/Default Route IPv4 Route Table IPv6 Static/Default Route IPv6 Route Table ARP Aging Time This window is used to display and configure the ARP aging time settings.

  • Page 81: Arp Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Enter the IP address that will be associated with the MAC address here. IP Address Hardware Address Enter the MAC address that will be associated with the IP address here.

  • Page 82: Ipv6 Neighbor

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide IPv6 Neighbor This window is used to display and configure the IPv6 neighbor settings. To view the following window, click L3 Features > IPv6 Neighbor, as shown below: Figure 6-4 IPv6 Neighbor Window...
  • Page 83 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > Interface > IPv4 Interface, as shown below: Figure 6-5 IPv4 Interface Window The fields that can be configured are described below:...

  • Page 84: Ipv6 Interface

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide IPv6 Interface This window is used to display and configure the IPv6 interface settings. To view the following window, click L3 Features > Interface > IPv6 Interface, as shown below:...

  • Page 85: Ipv4 Static/Default Route

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Select the Default option to specify that if the default router is selected on this interface, a default route will be installed using that default router. This option can only be specified on one interface.

  • Page 86: Ipv4 Route Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Only the Default Route is supported. Gateway Enter the gateway address for this route here. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry.

  • Page 87: Ipv6 Route Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IPv6 Static/Default Route, as shown below: Figure 6-12 IPv6 Static/Default Route Window The fields that can be configured are described below:...
  • Page 88 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide...

  • Page 89: Security

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Security RADIUS TACACS+ SFTP Server Settings Network Protocol Port Protect Settings AAA Global Settings This window is used to enable or disable the global Authentication, Authorization, and Accounting (AAA) state.

  • Page 90: Application Accounting Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 7-3 Application Authentication Settings (Edit) Window The fields that can be configured are described below: Parameter Description Login Method List After clicking the Edit button for the specific entry, enter the login method list name used here.

  • Page 91: Authentication Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 7-5 Application Accounting Settings (Edit) Window The fields that can be configured in Application Accounting Exec Method list are described below: Parameter Description Exec Method List After clicking the Edit button for the specific entry, enter the EXEC method list name used here.
  • Page 92 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > AAA > Authentication Settings, as shown below: Figure 7-6 Authentication Settings Window The fields that can be configured in AAA Authentication 802.1X are described below:...
  • Page 93 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in AAA Authentication WEB-Auth are described below: Parameter Description Status Select to enable or disable the AAA Web authentication state here. Method 1 ~ Method 4 Select the method lists that will be used for this configuration here.

  • Page 94: Accounting Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in AAA Authentication Login are described below: Parameter Description List Name Enter the method list name that will be used with the AAA authentication login option here.
  • Page 95 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in AAA Accounting System are described below: Parameter Description Default Select to enable or disable the use of the default method list here.

  • Page 96: Radius

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Level Select the privilege level used here. Options to choose from are levels 1 to 15. List Name Enter the method list name that will be used with the AAA accounting commands option here.

  • Page 97: Radius Server Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide RADIUS Server Settings This window is used to display and configure the RADIUS server settings. To view the following window, click Security > RADIUS > RADIUS Server Settings, as shown below:...

  • Page 98: Radius Statistic

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown below: Figure 7-14 RADIUS Group Server Settings Window The fields that can be configured are described below:...

  • Page 99: Tacacs

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > RADIUS > RADIUS Statistic, as shown below: Figure 7-16 RADIUS Statistic Window The fields that can be configured are described below:...

  • Page 100: Tacacs+ Group Server Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > TACACS+ > TACACS+ Server Settings, as shown below: Figure 7-17 TACACS+ Server Settings Window The fields that can be configured are described below:...

  • Page 101: Tacacs+ Statistic

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Group Server Name Enter the TACACS+ group server name here. This name can be up to 32 characters long.

  • Page 102: Ssh

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Secure Shell (SSH) is a program allowing secure remote login and secure network services over an insecure network. It allows a secure login to remote host computers, a safe method of executing commands on a remote end node, and will provide secure encrypted and authenticated communication between two non-trusted hosts.

  • Page 103: Host Key

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Host Key This window is used to view and generate the SSH host key. To view the following window, click Security > SSH > Host Key, as shown below:...

  • Page 104: Ssh Server Connection

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After the key was successfully generated, the following window will appear. Figure 7-24 Host Key (Generating, Success) Window SSH Server Connection This window is used to view the SSH server connections table.

  • Page 105: Ssl

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Host Name After selecting the Host-based option as the Authentication Method, enter the host name here. IPv4 Address After selecting the Host-based option as the Authentication Method, select and enter the IPv4 address here.

  • Page 106: Ssl Global Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SSL Global Settings This window is used to display and configure the global SSL settings. To view the following window, click Security > SSL > SSL Global Settings, as shown below:...

  • Page 107: Ssl Service Policy

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > SSL > Crypto PKI Trustpoint, as shown below: Figure 7-28 Crypto PKI Trustpoint Window The fields that can be configured are described below:...

  • Page 108: Sftp Server Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > SSL > SSL Service Policy, as shown below: Figure 7-29 SSL Service Policy Window The fields that can be configured are described below:...

  • Page 109: Network Protocol Port Protect Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > SFTP Server Settings, as shown below: Figure 7-30 SFTP Server Settings Window The fields that can be configured are described below:...

  • Page 110: Oam

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Cable Diagnostics Cable Diagnostics The cable diagnostics feature is designed primarily for administrators or customer service representatives to verify and test copper cables; it can rapidly determine the quality of the cables and the types of error.

  • Page 111: Ddm

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Fault messages: • Open - This pair is left open. • Short - Two lines of this pair is shorted. • CrossTalk - Lines of this pair is short with lines in other pairs.

  • Page 112: Ddm Temperature Threshold Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in DDM Shutdown Settings are described below: Parameter Description From Port - To Port Select the appropriate port range used for the configuration here.

  • Page 113: Ddm Bias Current Threshold Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click OAM > DDM > DDM Voltage Threshold Settings, as shown below: Figure 8-4 DDM Voltage Threshold Settings Window The fields that can be configured are described below:...

  • Page 114: Ddm Tx Power Threshold Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Action Select the action that will be taken here. Options to choose from are Add and Delete. Type Select the type of bias current threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning.

  • Page 115: Ddm Status Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as shown below: Figure 8-7 DDM RX Power Threshold Settings Window The fields that can be configured are described below:...

  • Page 116: Monitoring

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Monitoring Utilization Statistics Device Environment External Alarm Settings Utilization Port Utilization This window is used to view the port utilization table. To view the following window, click Monitoring > Utilization > Port Utilization, as shown below:...
  • Page 117 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Monitoring > Utilization > History Utilization, as shown below: Figure 9-2 History Utilization (Memory) Window After selecting CPU as the Type, the following window will appear:...

  • Page 118: Statistics

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • 15 Minutes - Specifies to display slots of 15-minute based information. • 1 Day - Specifies to display slots of daily based information. For 15-minute based statistics, slot 1 represents the time from 15 minutes ago until now, slot 2 represents the time from 30 minutes ago until 15 minutes ago and so on.

  • Page 119: Interface Counters

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following window will appear: Figure 9-6 Port (Show Detail) Window Click the Back button to return to the previous window. Click the Refresh button to refresh the information displayed in the table.

  • Page 120: Interface History Counters

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Type Specifies to display port-based counter information. From Port - To Port Select the range of ports that will be used in this display here.

  • Page 121: Counters

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Monitoring > Statistics > Interface History Counters, as shown below: Figure 9-9 Interface History Counters (Port) Window The fields that can be configured are described below:...
  • Page 122 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Monitoring > Statistics > Counters, as shown below: Figure 9-10 Counters (Port) Window The fields that can be configured are described below: Parameter Description Select to display port-based counter information here.

  • Page 123: Device Environment

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following window will appear: Figure 9-11 Counters (Show Detail) Window Click the Back button to return to the previous window. Click the Refresh button to refresh the information displayed in the table.

  • Page 124: External Alarm Settings

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Monitoring > Device Environment, as shown below: Figure 9-12 Device Environment Window External Alarm Settings This window is used to display and configure the external alarm settings. This is used to enable monitoring the external alarm source status or to configure external alarm message for a channel.
  • Page 125 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in External Alarm Settings are described below: Parameter Description Channel Select the channel to be configured here. The range is from 1 to 2.

  • Page 126: 10. Green

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 10. Green Power Saving Power Saving This window is used to display and configure the power saving settings of the Switch. To view the following window, click Green > Power Saving, as shown below:...

  • Page 127: Eee

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made for each individual section. Click the Delete button to remove the specified entry. NOTE: The hibernation feature can only be configured when physical stacking is disabled on this Switch.
  • Page 128 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Green > EEE, as shown below: Figure 10-3 EEE Window The fields that can be configured are described below: Parameter Description From Port - To Port Select the appropriate port range used for the configuration here.

  • Page 129: 11. Save And Tools

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 11. Save and Tools Save Configuration Firmware Upgrade & Backup Configuration Restore & Backup Certificate & Key Restore & Backup Log Backup Ping Trace Route Reset Reboot System Save Configuration This window is used to save the running configuration to the start-up configuration.

  • Page 130: Firmware Upgrade From Tftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Source File In this field the source firmware file’s filename and path will be displayed after selection. To navigate to the location of the firmware file located on the local PC, either double click in the text box or click the Browse button.

  • Page 131: Firmware Upgrade From Rcp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from FTP, as shown below: Figure 11-4 Firmware Upgrade from FTP Window The fields that can be configured are described below:...

  • Page 132: Firmware Upgrade From Sftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description RCP Server IP Enter the RCP server IP address here. User Name Enter the user name used for the RCP connection here. This name can be up to 32 characters long.

  • Page 133: Firmware Backup To Tftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below: Figure 11-7 Firmware Backup to HTTP Window The fields that can be configured are described below:...

  • Page 134: Firmware Backup To Rcp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to FTP, as shown below: Figure 11-9 Firmware Backup to FTP Window The fields that can be configured are described below:...

  • Page 135: Firmware Backup To Sftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description RCP Server IP Enter the RCP server IP address here. User Name Enter the user name used for the RCP connection here. This name can be up to 32 characters long.

  • Page 136: Configuration Restore From Tftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 11-12 Configuration Restore from HTTP Window The fields that can be configured are described below:...

  • Page 137: Configuration Restore From Ftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Destination File Enter the destination path and location where the configuration file should be stored on the Switch. This field can be up to 64 characters long.

  • Page 138: Configuration Restore From Rcp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Restore button to initiate the configuration restore. Configuration Restore from RCP This window is used to initiate a configuration restore from an RCP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from RCP,...

  • Page 139: Configuration Backup To Http

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from SFTP, as shown below: Figure 11-16 Configuration Restore from SFTP Window The fields that can be configured are described below:...

  • Page 140: Configuration Backup To Tftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • Select the running-config option to back up the running configuration file from the Switch. • Select the startup-config option to back up the start-up configuration file from the Switch.

  • Page 141: Configuration Backup To Rcp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to FTP, as shown below: Figure 11-19 Configuration Backup to FTP Window The fields that can be configured are described below:...

  • Page 142: Configuration Backup To Sftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description RCP Server IP Enter the RCP server IP address here. User Name Enter the user name used for the RCP connection here. This name can be up to 32 characters long.

  • Page 143: Certificate & Key Restore & Backup

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Certificate & Key Restore & Backup Certificate & Key Restore from HTTP This window is used to initiate a certificate and key restore from a local PC using HTTP.

  • Page 144: Certificate & Key Restore From Ftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Source File Enter the source filename and path of the certificate and key file located on the TFTP server here. This field can be up to 64 characters long.

  • Page 145: Certificate & Key Restore From Sftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Certificate & Key Restore & Backup > Certificate & Key Restore from RCP, as shown below: Figure 11-25 Certificate & Key Restore from RCP Window...

  • Page 146: Certificate & Key Backup To Http

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Destination File Enter the destination path and location where the new certificate and key should be stored on the Switch. This field can be up to 64 characters long.

  • Page 147: Certificate & Key Backup To Ftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Destination File Enter the destination filename and path of the certificate and key file to be backed up to the TFTP server here. This field can be up to 64 characters long.

  • Page 148: Certificate & Key Backup To Sftp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to RCP, as shown below: Figure 11-30 Certificate & Key Backup to RCP Window...

  • Page 149: Log Backup

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Destination File Enter the destination filename and path of the certificate and key file to be backed up to the SFTP server here. This field can be up to 64 characters long.

  • Page 150: Log Backup To Rcp

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Destination File Enter the destination path and location where the log file should be stored on the TFTP server. This field can be up to 64 characters long.

  • Page 151: Ping

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Log Backup > Log Backup to SFTP, as shown below: Figure 11-35 Log Backup to SFTP Window The fields that can be configured are described below:...
  • Page 152 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Ping, as shown below: Figure 11-36 Ping Window The fields that can be configured in IPv4 Ping are described below: Parameter...

  • Page 153: Trace Route

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Length Enter the length value here. This specifies the number of data bytes to send. The default value is 56, which translates into 64 ICMPv6 data bytes when combined with the 8 bytes of ICMPv6 header data.
  • Page 154 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in IPv4 Trace Route are described below: Parameter Description Select and enter the IPv4 address of the destination here. IPv4 Address Initial TTL Enter the initial Time-To-Live (TTL) value here.

  • Page 155: Reset

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Back button to stop the trace route and return to the IPv4 Trace Route section. Reset This window is used to reset the Switch’s configuration to the factory default settings.

  • Page 156: Appendix A - Password Recovery Procedure

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Appendix A - Password Recovery Procedure This section describes the procedure for resetting passwords on the D-Link DGS-3630 Series Switch. Authenticating any user who tries to access networks is necessary and important. The basic authentication method used to accept qualified users is through a local login, utilizing a Username and Password.

  • Page 157: Appendix B - System Log Entries

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Appendix B - System Log Entries The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this Switch. Log Description Severity Event Description: AAA global state is enabled or disabled.
  • Page 158 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web (SSL). client-ip: It indicates the client’s IP address if valid through IP protocol. aaa-method: It indicates the authentication method, e.g.: none, local, server.
  • Page 159 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Event Description: Gratuitous ARP detected duplicate IP. Warning Log Message: Conflict IP was detected with this device (IP: <ipaddr>, MAC: <macaddr>, Port <[unitID:]portNum>, Interface: <ipif_name>) Parameters Description: ipaddr: The IP address which is duplicated with our device.
  • Page 160 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity pathFile: Path and file name on server. Event Description: Firmware uploaded unsuccessfully. Warning Log Message: [Unit <unitID>,]Firmware uploaded by <session> unsuccessfully (Username: <username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name: <pathFile>)
  • Page 161 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Log Message: [Unit <unitID>,]Configuration uploaded by <session> unsuccessfully. (Username: <username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name: <pathFile>) Parameters Description: unitID: The unit ID.
  • Page 162 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide NOTE: • The user’s session refers to Console, Web, SNMP, Telnet, and SSH sessions. • If the Switch is in the standalone state, there will be no unit ID in the log message.
  • Page 163 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Interface Log Description Severity Event Description: Port link up. Informational Log Message: Port <portNum> link up, <link state> Parameters Description: portNum: 1.Interger value;2.Represent the logic port number of the device.
  • Page 164 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity username: Represent current login user. Event Description: Console session timed out. Informational Log Message: [Unit <unitID>,] Console session timed out (Username: <username>) Parameters Description: unitID: The unit ID.
  • Page 165 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Parameters Description: username: Represent current login user. ipaddr: Represent client IP address. MSTP Debug Log Description Severity Event Description: Topology changed. Notification Log Message: Topology changed [([Instance:<InstanceID>] , <portNum> ,MAC: <macaddr>)]...
  • Page 166 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Event Description: Spanning Tree instance created. Informational Log Message: Spanning Tree instance created. (Instance:<InstanceID>) Parameters Description: InstanceID: Instance ID. Event Description: Spanning Tree instance deleted. Informational Log Message: Spanning Tree instance deleted.
  • Page 167 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide OpenFlow Log Description Severity Event Description: This log will be generated when OpenFlow TCP/TLS session is Informational successfully connected with the controller. Log Message: <connection-type> session is successfully connected with the controller <ipaddr>:<port>...
  • Page 168 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity error-type: It indicates the error type when an error occurs between the Switch and the controller. The error type may be: OFPET_BAD_REQUEST OFPET_FLOW_MOD_FAILED OFPET_GROUP_MOD_FAILED OFPET_ROLE_REQUEST_FAILED OFPET_METER_MOD_FAILED ipaddr: It indicates the controller’s IP address.
  • Page 169 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Unit <id>: The unit ID. channelID: The channel ID. alarmMsg: The alarm Msg. Log Description Severity Event Description: Total power usage threshold is exceeded. Warning Log Message: Unit <unit-id> usage threshold <percentage> is exceeded Parameters Description: unit-id: The box ID.
  • Page 170 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Event Description: after schedule reboot at specific time. Informational Log Message: System was restarted by schedule at specific time Event Description: after schedule reboot happens with save_before_reboot configured.
  • Page 171 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity ipaddr: The IP address of Telnet client. username: the user name that used to login Telnet server. Event Description: Login failed through Telnet. Warning Log Message: Login failed through Telnet (Username: <username>, IP: <ipaddr>) Parameters Description: ipaddr: The IP address of Telnet client.
  • Page 172 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Severity Log Message: Login failed through Web(SSL) (Username: <username>, IP: <ipaddr>) Parameters Description: username: The use name that used to login HTTPS server. ipaddr: The IP address of HTTPS client.

  • Page 173: Appendix C - Trap Entries

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Appendix C - Trap Entries The following table lists all possible trap log entries and their corresponding meanings that will appear in the Switch. Authentication Fail Trap Name Description...
  • Page 174 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Trap Name Description of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
  • Page 175 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Peripheral Trap Name Description dEntityExtFanStatusChg The commander switch will send this notification when 1.3.6.1.4.1.171.14.5.0.1 a fan fails (dEntityExtEnvFanStatus is 'fault') or recovers (dEntityExtEnvFanStatus is 'ok'). Binding objects: (1) dEntityExtEnvFanUnitId...
  • Page 176 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Trap Name Description (1) pethPsePortOverLoadCounter dPoeIfPowerShortCircuitNotification This trap indicates if PSE state diagram enters 1.3.6.1.4.1.171.14.24.0.3 the state ERROR_DELAY_SHORT. At least 500 msec must elapse between notifications being emitted by the same object instance.
  • Page 177 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Trap Name Description fallingAlarm The SNMP trap that is generated when an alarm entry 1.3.6.1.2.1.16.0.2 crosses its falling threshold and generates an event that is configured for sending SNMP traps.

  • Page 178: Appendix D - Openflow Object Details

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Appendix D - OpenFlow Object Details Application developers can program a set of objects in the Switch using the OpenFlow protocol (version 1.3). The programmable objects include Flow Tables, Group Table entries, and Meter Table entries. This section provides programming descriptions for these objects.
  • Page 179 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Field Description UDP_DST The destination UDP port. SCTP_SRC The source SCTP port. SCTP_DST The destination SCTP port. ARP_SPA The ARP source IPv4 address. IPV6_SRC The source IPv6 address. IPV6_DST The destination IPv6 address.

  • Page 180: Group Table

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Restrictions: This Policy ACL Flow Table is organized into two mutually exclusive logical sub-tables. One is used to match IPv6 flows and the other one is used to match non-IPv6 flows. These two tables should be considered as a single table. But there are some restrictions: •...

  • Page 181: L2 Rewrite Group Entry Type

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide L2 Rewrite Group Entry Type Field Description Group Identifier A 32-bit unsigned integer, uniquely identifying the group on the OpenFlow switch. The naming rule is shown in the L2 Rewrite Group Entry Naming Conversion table.

  • Page 182: L3 Unicast Group Entry Type

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Field Bits Description Chain ID 16 to 27 The chain ID is used to reference to Layer 2 interface group entries. The range is from 1 to 4094. Kind 28 to 31 3 (L2 Multicast).

  • Page 183: L3 Ecmp Group Entry Type

    DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide L3 Unicast Group Entry Counters Field Description Reference Count (Flow The number of flow entries or group entries that are currently referencing this group entry. Entries) Duration (Seconds) The time, in seconds, since this group entry was installed...
  • Page 184 DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Field Description • 3: Stats (Not supported). Meter Bands Only one meter band is supported. Counters Specifies per-meter entry counters. Meter Entry Counters Field Description Flow Count The number of flow entities that are currently referencing to this meter table entry.

This manual is also suitable for:

Dgs-3630-28pcDgs-3630-52pc

Table of Contents