D-Link DGS-3630 Series Reference Manual page 331

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
Click the Show Detail button to view more detailed information for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Click the Back button to return to the previous window.
MSDP
MSDP Global Settings
This window is used to display and configure the global Multicast Source Discovery Protocol (MSDP) settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > MSDP > MSDP Global
Settings, as shown below:
The fields that can be configured are described below:
Parameter
Global State
Connect Retry Interval
Description
Enter the VLAN interface name used in this display here.
Figure 6-149 PIM for IPv6 Neighbor Table (Show Detail) Window
Figure 6-150 MSDP Global Settings Window
Description
Select to globally enable or disable the MSDP feature here.
Enter the connect retry interval time value here. The range is from 1 to 65535
seconds. This is used to configure the interval at which MSDP peers will wait after
peering sessions are reset before attempting to re-establish. A larger time interval
will delay the time before attempting to re-establish the peer session. For best
results, configure the value in the range from 1 to 60 seconds. Select the Default
319