D-Link DGS-3630 Series Reference Manual page 595

Layer 3 stackable managed switch web ui reference guide

Hide thumbs Also See for DGS-3630 Series:

Table of Contents

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

The fields that can be configured for Egress VLAN Mode Settings are described below:

Egress VLAN Mode

Click the Apply button to accept the changes made.

After clicking the Show Detail button, the following page will appear.

link to vie more detailed information about the topic.

Click the Back button to return to the previous window.

After clicking the

Select the egress VLAN mode of the VPLS here. The egress VLAN mode will

affect the outer VLAN tag handling before the decapsulated packet egress on

ACs belonging to this VPLS. Options to choose from are:

• Strip - Specifies that the outer-tag of the packet will be stripped before

egress on the AC.

• Change VLAN - Specifies that the outer-tag of the packet will be changed to

the VLAN ID of the AC before egress on the AC. This can only be applied on

Ethernet VLAN-based ACs.

Select the None option to use the default setting.

Figure 12-7 VPLS Settings (Show Detail) Window

link for Peers Via Pseudowires, for example, the following page will appear.

Figure 12-8 VPLS Settings (Show Detail, Show Detail) Window