Smtp Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in D-Link Discovery Protocol are described below:
Parameter
D-Link Discovery Protocol
State
Report Timer
Click the Apply button to accept the changes made.
The fields that can be configured in DDP Port Settings are described below:
Parameter
Unit
From Port - To Port
State
Click the Apply button to accept the changes made.

SMTP Settings

This window is used to display and configure the Simple Mail Transfer Protocol (SMTP) settings.
To view the following window, click Management > SMTP Settings, as shown below:
Figure 4-103 D-Link Discovery Protocol Window
Description
Select to globally enable or disable the DDP feature here.
Select the report timer value here. This is used to configure interval between two
consecutive DDP report messages. Options to choose from are 30, 60, 90, 120
seconds, or Never. Selecting Never instructs the Switch to stop sending report
messages.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DDP feature on the specified port(s) here.
114