D-Link DGS-3630 Series Reference Manual page 593

Layer 3 stackable managed switch web ui reference guide

Hide thumbs Also See for DGS-3630 Series:

Table of Contents

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

From Port - To Port

Click the Apply button to accept the changes made.

Click the Edit button to configure more detailed settings related to the specific entry.

Click the Show Detail button to view more detailed information about the specific entry.

Click the Delete button to remove the specific entry.

Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

After clicking the Edit button, the following page will appear.

Click the Back button to return to the previous window.

The fields that can be configured for VPLS Settings are described below:

Select the Switch unit that will be used for this configuration here.

Select the range of ports that will be used for this configuration here.

Select and enter the SVID here. The range is from 1 to 4094.

Enter the VPLS instance name here. This name can be up to 32 characters long.

Figure 12-6 VPLS Settings (Edit) Window

Select and enter the VPLS instance ID here. The range is from 1 to 4294967295.

Select the PW type here. Options to choose from are:

• Raw - Specifies that the service type is in the Ethernet-raw mode. It means

that the encapsulation of all PWs in the VPLS is in the Ethernet-raw mode.

• Tagged - Specifies that the service type is in the Ethernet-tagged mode. It

means that the encapsulation of all PWs in the VPLS is in the Ethernet-

tagged mode.

Select and enter the local AC link's MTU value of a VPLS that will be advertised