D-Link DGS-3630 Series Reference Manual page 314

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
After clicking the Show List button, the following page will appear.
The fields that can be configured are described below:
Parameter
ACL Type
ACL List
Click the Find button to display a list of access lists based on the selection made.
Click the Show All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.
PIM RP Table
This window is used to find and display PIM RP information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP
Table, as shown below:
The fields that can be configured are described below:
Parameter
RP Hash
Click the Find button to display a list of access lists based on the selection made.
Click the Show All button to display all configured access lists.
Figure 6-122 PIM RP Candidate (Show List) Window
Description
Select the ACL type that will be used to display the type of existing access lists in
the table here. Options to choose from are IP ACL, Expert IP ACL, IPv6 ACL,
Expert IPv6 ACL, MAC ACL, and Expert ACL.
Select the radio button of the access list in the table that will be used here.
Figure 6-123 PIM RP Table Window
Description
Enter the IPv4 multicast group address here.
302