Ping - D-Link DGS-3630 Series Reference Manual

Layer 3 stackable managed switch web ui reference guide
Hide thumbs Also See for DGS-3630 Series:
Table of Contents

Advertisement

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
VRF Name
Destination File
Log Type
Click the Backup button to initiate the system log backup.

Ping

Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then
responds to or "echoes" the packets sent from the Switch. This is very useful to verify connectivity between the Switch
and other nodes on the network.
To view the following window, click Tools > Ping, as shown below:
Description
Enter the RCP server IP address here.
Enter the user name used for the RCP connection here. This name can be up to
32 characters long.
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Enter the destination path and location where the log file should be stored on the
RCP server. This field can be up to 64 characters long.
Select the log type that will be backed up to the RCP server.
• When the System Log option is selected, the system log will be backed up.
• When the Attack Log is selected, the attack log will be backed up.
619

Advertisement

Table of Contents
loading

Table of Contents