Ipv4 Static Route Bfd; Ipv4 Route Table - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv4 Static Route BFD

This window is used to display and configure the IPv4 static route Bidirectional Forwarding Detection (BFD) settings.
To view the following window, click L3 Features > IPv4 Static Route BFD, as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
IP Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv4 Route Table

This window is used to display and configure the IPv4 route table settings.
To view the following window, click L3 Features > IPv4 Route Table, as shown below:
The fields that can be configured are described below:
Figure 6-22 IPv4 Static Route BFD Window
Description
Enter the name of the interface that will be used to create the BFD session here.
This name can be up to 12 characters long.
Enter the IP address of the BFD peer here.
Figure 6-23 IPv4 Route Table Window
229