D-Link DGS-3630 Series Reference Manual page 369

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in Peer Group are described below:
Parameter
Group Name
VRF Name
Remote AS Number
Action
Click the Apply button to accept the changes made.
The fields that can be configured in Peer Group Member are described below:
Parameter
IP Address
Group Name
Action
Click the Apply button to accept the changes made.
The fields that can be configured in Peer Group Table are described below:
Figure 6-198 Peer Group Window
Description
Enter the name of the BGP peer group here. This name can be up to 16
characters long.
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Please Select button to select a pre-configured VRF instance that
will be used here.
Enter the remote AS number here. The range is from 1 to 4294967295.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Description
Select and enter the IPv4 or IPv6 address of the BGP peer group member here.
Enter the name of the BGP peer group member here. This name can be up to 16
characters long.
Select the action that will be taken here. Options to choose from are Add and
Delete.
357