Radius Server Settings; Radius Group Server Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

RADIUS Server Settings

This window is used to display and configure the RADIUS server settings.
To view the following window, click Security > RADIUS > RADIUS Server Settings, as shown below:
The fields that can be configured are described below:
Parameter
IP Address
IPv6 Address
Authentication Port
Accounting Port
Retransmit
Timeout
Key Type
Key
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

RADIUS Group Server Settings

This window is used to display and configure the RADIUS group server settings.
To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown below:
Figure 9-30 RADIUS Server Settings Window
Description
Enter the RADIUS server IPv4 address here.
Enter the RADIUS server IPv6 address here.
Enter the authentication port number used here. This value must be between 0
and 65535. By default, this value is 1812. If no authentication is used, use the
value 0.
Enter the accounting port number used here. This value must be between 0 and
65535. By default, this value is 1813. If no accounting is used, use the value 0.
Enter the retransmit value used here. This value must be between 0 and 20. By
default, this value is 3. To disable this option, enter the value 0.
Enter the timeout value used here. This value must be between 1 and 255
seconds. By default, this value is 5 seconds.
Select the key type that will be used here. Options to choose from are Plain Text
and Encrypted.
Enter the key, used to communicate with the RADIUS server, here. This key can
be up to 32 characters long.
475