Dhcp Server Manual Binding - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Lease
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
DHCP Server Exclude Address
This window is used to view and exclude a range of IPv4 addresses from being allocated to the DHCP client. The
DHCP server automatically allocates addresses in DHCP address pools to DHCP clients. All the addresses except the
interface's IP address on the router and the excluded address(es) specified here are available for allocation. Multiple
ranges of addresses can be excluded. To remove a range of excluded addresses, administrators must specify the
exact range of addresses previously configured.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Exclude Address, as
shown below:
The fields that can be configured are described below:
Parameter
VRF Name
Begin Address
End Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

DHCP Server Manual Binding

This window is used to display and configure the DHCP server manual binding settings. With a manual binding entry,
the IP address can be either be bound with a client-identifier or bound with the hardware address of the host.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Manual Binding, as
shown below:
Description
system uses broadcasts. A Peer To Peer (p-node) system uses only point-to-
point name queries to a name server (WINS). A Mixed (m-node) system
broadcasts first, and then queries the name server. A Hybrid (h-node) system
queries the name server first, and then broadcasts. The Hybrid type is
recommended.
Enter and select the lease time for an IPv4 address that is assigned from the
address pool here. Enter the Days in the range from 0 to 365. Select the Hours
and Minutes from the drop-down menus. Alternatively, the Infinite option can be
selected to specify that the lease time is unlimited.
Figure 4-34 DHCP Server Exclude Address Window
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Enter the first IPv4 address of a range of addresses to be excluded here.
Enter the last IPv4 address of a range of addresses to be excluded here.
58