Step 4 - Apply Port - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Specify ICMP Message
Type
ICMP Message Type
Message Code
DSCP
Traffic Class
TCP Flag
Flow Label
Time Range
Action
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.

Step 4 - Apply Port

After clicking the Next button, the following window will appear.
The fields that can be configured are described below:
Description
This parameter is only available in the protocol type TCP and UDP.
Select the ICMP message type used here.
This parameter is only available in the protocol type ICMP.
When the ICMP Message Type is not selected, enter the ICMP Message Type
numerical value used here. When the ICMP Message Type is selected, this
numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
When the ICMP Message Type is not selected, enter the Message Code
numerical value used here. When the ICMP Message Type is selected, this
numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
Select the DSCP value that will be used here. Options to choose from are default
(0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32
(28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4
(32), cs5 (40), cs6 (48), cs7 (56), and ef (46).
• Value - The DSCP value can also manually be entered here. The range is
from 0 to 63.
• Mask - Enter the DSCP mask value here. The range is from 0x0 to 0x3F.
Select and enter the traffic class value here. The range is from 0 to 255.
• Mask - Enter the traffic class mask value here. The range is from 0x0 to
0xFF.
Tick the appropriate TCP flag option to include the flag in this rule. Options to
choose from are ack, fin, psh, rst, syn, and urg.
This parameter is only available in the protocol type TCP.
Enter the flow label value here. This value must be between 0 and 1048575.
• Mask - Enter the flow label mask value here. The range is from 0x0 to
0xFFFFF.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Select the action that this rule will take here. Options to choose from are Permit,
Deny and Deny CPU.
Figure 8-7 ACL Configuration Wizard (Create, Port) Window
432