Peripheral Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in System Information Settings are described below:
Parameter
System Name
System Location
System Contact
Click the Apply button to accept the changes made.
The fields that can be configured in Management Interface are described below:
Parameter
State
IPv4 Address
Subnet Mask
Gateway
Description
Click the Apply button to accept the changes made.

Peripheral Settings

This window is used to display and configure the environment trap settings and environment temperature threshold
settings.
To view the following window, click System > Peripheral Settings, as shown below:
Figure 3-2 System Information Settings Window
Description
Enter a system name for the Switch, if so desired. This name will identify it in the
Switch network.
Enter the location of the Switch, if so desired.
Enter a contact name for the Switch, if so desired.
Description
Select to enable or disable the state of the management interface here.
Enter the IPv4 address for this interface here.
Enter the IPv4 subnet mask for this interface here.
Enter the gateway IPv4 address for this interface here.
Enter the description for the management interface here. This can be up to 64
characters long.
7