Dxs-1210 series l2 10 gigabit ethernet switch (394 pages)
Summary of Contents for D-Link DXS-3400 SERIES
Page 2
Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Page 3
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide SFP (Mini-GBIC), XENPAK, and XFP Regulatory Compliance Networks pluggable optical modules meet the following regulatory requirements: Class 1. IEC/EN60825-1:2007 2nd Edition or later, European Standard ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Intended Readers The DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide contains detailed information about the hardware specifications of the switches in this series. It also contains brief information on how to configure and manage a switch in this series.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide The product has been dropped or damaged. The product does not operate correctly when the operating instructions are correctly followed. General safety cautions: Keep the system away from radiators and heat sources. Also, do not block cooling vents.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide serious injury. Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Table of Contents Intended Readers ................................ 4 Typographical Conventions ............................4 Notes and Cautions ..............................4 Safety Instructions ............................... 4 Safety Cautions ..............................4 General Precautions for Rack-Mountable Products ....................5 Protecting Against Electrostatic Discharge ........................
Page 8
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide General ..................................37 Physical and Environmental ............................37 Performance................................38 LED Indicators ................................39 Port Functions ................................40 Appendix B - Cables and Connectors ......................... 42 Ethernet Cable ................................42 Console Cable (RJ45 to RS-232) ..........................
With stacking architecture, only a single IP address is needed to manage all switches in the stack. The DXS-3400 Series also provides great flexibility to adding or removing a switch to and from the network without interrupting normal network operation. The redundant power supply design provides a reliable HA architecture to ensure non-stop operation.
Page 10
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Features that can be found on this switch are: Virtual Stacking. D-Link Single IP Management Weighted Deficit Round Robin (WDRR), and (SIM) 802.1Qaz Enhanced Transmission Selection ...
Page 11
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Trusted Host Management Information Base (MIBs) for Cable Diagnostics MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, 802.3ah Ethernet Link OAM (Dying Gasp) RMONv2 MIB, Ether-like MIB, 802.3 MAU MIB, ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Front Panel Components The front panel of the Switches in this series features a variety of LED indicators and ports. Figure 1-1 Front panel view of the DXS-3400-24TC Figure 1-2 Front panel view of the DXS-3400-24SC Ports that can be found on the front panel of this switch are listed in the table below.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide LED Indicators Located on the front panel of the Switch are LED indicators: Stack ID, Power1, Power2, MGMT, Console, Fan1, Fan2, Fan3, and USB. For each port there is a light representing the port speed and activity.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Description This LED will be off when both console ports are not active. Fan1, Fan2, Fan3 This LED will light solid green when the fan is operating normally.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 1-8 Rear Panel view of the DXS-3400-24SC with a DC Power Supply Components that can be found on the rear panel of this switch are listed in the table below.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Side Panel Components The side panels of the Switches in this series feature rack-mounting bracket screw holes that can be used when the Switch is installed into a rack-mount unit.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 2. Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch into a Rack Installing Transceivers into the Transceiver Ports Installing Power Modules into the Power Module...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Installing the Switch into a Rack This section is used to guide the user through installing the Switch into a switch rack. The Switch can be mounted in a standard 19"...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide generally used to connect this switch to optical fiber connections and can be used to connect devices to the Switch over great distances. The maximum distance that the RJ45 wiring connection can reach is 100 meters. Fiber optic connections can span several kilometers.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 2-5 Installing an AC Power Supply Module Figure 2-6 Installed AC Power Supply Module In addition, an optional second AC power supply module can be plugged into the second power supply module slot, as displayed above.
Page 21
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 2-7 Installing a DC Power Supply Module Figure 2-8 Connecting a DC Battery to the DC Power Supply Module The DC power and AC power of the device will back each other up immediately when one of the power sources fails.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Installing Fan Modules into the Fan Module Slots Located on the rear panel of this switch there are three fan module slots. Figure 2-9 Installing a Fan Module The user can easily remove and insert the DXS-FAN100 fan module into these slots.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 3. Switch Connections Switch to an End Node Switch to Another Switch Switch Stacking Switch to a Server Switch to an End Node An end node is a generic name for edge networking devices that will be connected to this switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Switch Stacking The DXS-3400 series supports stacking up to 4 switches together while being managed through one console connection on the master switch, or by an IP address through the MGMT port, or by multiple IP addresses through any of the RJ45/SFP+ ports using Telnet, the Web UI, and SNMP.
Page 25
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 3-4 Duplex Chain stacking topology (SFP+) The figure below illustrates how switches can be stacked in a Duplex Ring formation using Category 6a cables with RJ45 connectors where the 2-port stacking configuration is used.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 3-6 Duplex Ring stacking topology (SFP+) NOTE: Stacking Input/Output 1 (SIO1) is a logical stacking port pair. SIO2 is also a logical stacking port pair. A logical stacking port pair must always be connected to the same Switch in the stack. Splitting logical stacking port pairs between different Switches in the stack might not guarantee a stable stacking connection.
Switch. Most of the features available through the CLI can be accessed through the Web UI. Web browsers like Microsoft’s Internet Explorer, Mozilla Firefox, or Google Chrome can be used. For more detailed information about the Web UI, refer to the DXS-3400 Series Web UI Reference Guide. Connecting to the Console Port The front panel of the Switch provides an RJ45 and a mini-USB console port to connect a remote system for monitoring and configuring the Switch.
Page 28
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Connect the male DB9 connector on the console cable (shipped with the Switch) to the RS-232 serial port on the computer running terminal emulation software then insert the RJ45 connector into the RJ45 console port on the front of the Switch.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Connecting to the Mini-USB Console Port To use the mini-USB console port, the following equipment is needed: A terminal or a computer with a USB 2.0 port and the ability to emulate a terminal.
Page 30
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Set the terminal emulation software as follows: Select the serial port that belongs to the virtual COM port. Set the data rate to 115200 baud. ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Connecting to the Switch for the First Time The Switch supports user-based security that can prevent unauthorized users from accessing the Switch or changing its configuration. This section will explain how to log into the Switch’s Command Line Interface via the out-of-band console connection.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide NOTE: Passwords are case sensitive. Usernames can be up to 32 characters in length. Passwords can be up to 32 plain-text characters in length. Configuring the IP Address Each switch must be assigned its own in-band IP Address, which is used for communication with an SNMP network manager or other TCP/IP applications.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Connecting using SNMP The Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) protocol, designed specifically for managing and monitoring network devices. The SNMP protocol enables Network Management Station (NMS) to read and modify the settings of gateways, routers, switches, and other network devices.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 5. Web-based Switch Configuration Introduction Logging into the Web UI Web User Interface (Web UI) Introduction Most software functions of the Switch can be managed, configured, and monitored via the embedded HTML Web UI.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide NOTE: After a user account was created, login credentials will be required to access the Web UI. During the sending and receiving of the login password to and from the Switch, this information will be protected using a strong encryption algorithm to prevent attackers from snooping this information to gain unauthorized access to the Switch.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide AREA 2 This area displays a file explorer-type menu tree with all configurable options. Select the folder or window to display. Open folders and click the hyperlinked window buttons and subfolders contained within them to display information pertaining to that category.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Feature Description DXS-3400-24TC: 441 mm (W) x 380 mm (D) x 44 mm (H), 19-inch, 1 U Dimensions Rack-mount size DXS-3400-24SC: 441 mm (W) x 380 mm (D) x 44 mm (H), 19-inch, 1 U...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide LED Indicators Location Color Status Description Per Device Power 1, Power 2 Green Light on (Solid) Power on Amber Light on (Solid) Power supply failure. Voltage, current, or...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Location Color Status Description Light off Link down or no link Port Functions Feature Description Console Port RJ45 or mini-USB interface for Out-Of-Band (OOB) CLI configuration RJ45 Ports Compliant with the following standards: ...
Page 41
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Feature Description DEM-432XT-DD (10GBASE-LR, single-mode, 10 km, with DDM) DEM-433XT (10GBASE-ER, single-mode, 40 km, without DDM) DEM-433XT-DD (10GBASE-ER, single-mode, 40 km, with DDM) DEM-434XT (10GBASE-ZR, single-mode, 80 km, without DDM) ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a straight-through Cat5/5e/6a/7 cable is necessary. Please review these products for matching cable pin assignment.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Console Cable (RJ45 to RS-232) A console cable is used to connect to the console port of the Switch to access the command line interface. The following diagram and table show the standard RJ45 to RS-232 cable and pin assignments.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Console Cable (USB to Mini-USB) A console cable is used to connect to the USB console port of the Switch to access the command line interface. The following diagram and table show the standard USB (Type A) to mini-USB (Type B) cable and pin assignments.
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Alarm Connector (RJ45) External devices can be connected to the alarm port to either trigger an alarm event or to be the recipient of an alarm event triggered by the Switch. External device connections can be paired together and connected to the alarm port using a standard RJ45 connector.
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 47
D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
This guide is only for initial configuration. Please refer to the user manual to learn more or visit http://www.mydlink.com for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website. http://support.dlink.com Canada...
Page 50
Europe customers TECHNICAL SUPPORT TECHNISCHE UNTERSTÜTZUNG ASSISTANCE TECHNIQUE ASISTENCIA TÉCNICA SUPPORTO TECNICO TECHNISCHE ONDERSTEUNING POMOC TECHNICZNA TECHNICKÁ PODPORA TECHNICKÁ PODPORA dlink.com/support TECHNIKAI TÁMOGATÁS TEKNISK SUPPORT TEKNISK SUPPORT TEKNISK STØTTE TEKNINEN TUKI ASSISTÊNCIA TÉCNICA ΤΕΧΝΙΚΉ ΥΠΟΣΤΉΡΙΞΗ TEHNIČKA PODRŠKA TEHNIČNA PODPORA SUPORT TEHNIC ТЕХНИЧЕСКА...
Page 51
Indonesia - www.dlink.co.id Malaysia - www.dlink.com.my Philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea customers Tel : +82-2-2028-1810 Monday to Friday 9:00am to 6:00pm Web : http://d-link.co.kr E-mail : g2b@d-link.co.kr New Zealand customers Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail: support@dlink.co.nz...
Page 52
08600 DLINK (for South Africa only) Monday to Friday 8:30am to 9:00pm South Africa Time Web: http://www.d-link.co.za E-mail: support@d-link.co.za D-Link Middle East - Dubai, U.A.E. customers Plot No. S31102, Jebel Ali Free Zone South, P.O.Box 18224, Dubai, U.A.E. Tel: +971-4-8809022...
Page 53
Pakistan customers Islamabad Office: 61-A, Jinnah Avenue, Blue Area, Suite # 11, EBC, Saudi Pak Tower, Islamabad - Pakistan Tel.: +92-51-2800397, 2800398 Fax: +92-51-2800399 Karachi Office: D-147/1, KDA Scheme # 1, Opposite Mudassir Park, Karsaz Road, Karachi – Pakistan Phone: +92-21-34548158, 34326649 Fax: +92-21-4375727 Technical Support: +92-21-34548310, 34305069 General Inquiries: info.pk@dlinkmea.com...
Page 55
Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка компании D-Link работает в круглосуточном режиме ежедневно, кроме...
Page 56
Soporte Técnico Para Usuarios En Latino America Por favor revise el número telefónico del Call Center de su país en http://www.dlinkla.com/soporte/call-center Soporte Técnico de D-Link a través de Internet Horario de atención Soporte Técnico en www.dlinkla.com e-mail: soporte@dlinkla.com & consultas@dlinkla.com...
Page 57
Clientes de Brasil Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.br/suporte...
Page 59
Pelanggan Indonesia Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id 日本のお客様 この度は弊社製品をお買い上げいただき、誠にありがとうございます。 製品に同梱されている保証書の購入元にお問い合わせください。 中國客戶 技術支持中心電話: 400-629-6688 技術支持中心傳真: (028)-61317620 各地維修中心地址請登陸官方網站查詢...
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...