Dhcp Class Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Service IPv6 DHCP State
Click the Apply button to accept the changes made.

DHCP Class Settings

This window is used to display and configure the DHCP class and the DHCP option matching pattern for the DHCP
class.
To view the following window, click Management > DHCP > DHCP Class Settings, as shown below:
The fields that can be configured are described below:
Parameter
Class Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the DHCP option matching pattern for the corresponding DCHP class.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Option
Hex
Description
Select this option to enable or disable the IPv6 DHCP Relay service.
Figure 4-27 DHCP Class Settings Window
Description
Enter the DHCP class name with a maximum of 32 characters.
Figure 4-28 DHCP Class Settings (Edit) Window
Description
Enter the DHCP option number. The range is from 1 to 255.
Enter the hex pattern of the specified DHCP option. Tick the * check box not to
53