D-Link DGS-3630 Series Reference Manual page 584

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Figure 11-20 MPLS QoS Settings (Edit, Outbound CoS to EXP Settings) Window
Click the Add button to add a new entry.
Click the Delete button to remove the specific entry.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Add button, the following page will appear.
Figure 11-21 MPLS QoS Settings (Edit, Outbound CoS to EXP Settings, Add) Window
The fields that can be configured are described below:
Parameter
EXP
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Binding FECs Settings tab, the following page will appear.
Description
Select the EXPs (on the right) to be mapped to CoS values (on the left) here. This
feature is used to configure the class EXP to CoS mapping of the policy. The
range is from 0 to 7. Select the Default option to use the default value.
572