D-Link DGS-3630 Series Reference Manual page 145

Layer 3 stackable managed switch web ui reference guide

Hide thumbs Also See for DGS-3630 Series:

Table of Contents

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

The fields that can be configured are described below:

Acceptable Frame

Ingress Checking

From Port - To Port

Click the Apply button to accept the changes made.

Click the Back button to discard the changes made and return to the previous page.

When Hybrid was selected as the VLAN Mode, the following page will appear.

The fields that can be configured are described below:

Figure 5-21 VLAN Interface (Access) Window

Select the VLAN mode option here. Options to choose from are Access, Hybrid,

Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk

Select the acceptable frame behavior option here. Options to choose from are

Tagged Only, Untagged Only, and Admit All.

Select to enable or disable the ingress checking function.

Enter the VLAN ID used for this configuration here. This value must be between 1

Select this option to enable the clone feature.

Select the range of ports that will be used in the clone feature here.

Figure 5-22 VLAN Interface (Hybrid) Window

Select the VLAN mode option here. Options to choose from are Access, Hybrid,

Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk